Marshall Electronics CV630-IP User Manual

English - 25
Tilt Down Limit -30 ~ 0 Limit the downward angle
Pan Flip On / Off
Activate the reverse Pan
command
Tilt Flip On / Off
Activate the reverse Tilt
command
Preset Speed
1. 5 deg/sec
2. 25 deg/sec
3. 50 deg/sec
4. 80 deg/sec
5. 120 deg/sec
6. 160 deg/sec
7. 200 deg/sec
8. 300 deg/sec
Set the rotation speed of the
cradle head when Preset is
executed
PTZ Speed
Comp
On / Off
Set the Pan/Tilt moving
speed to vary from the zoom
position
D-Effect Mirror
1. Off
2. Mirror
3. Flip
4. Mirror + Flip
Set the mode at which the
image is turned
Auto Focus
AF Sensitivity
1. Low
2. Middle
3. High
For AF triggering speed, the
higher the speed is, the
faster AF is triggered
AF Frame
1. Center
2. Full Frame
3. Auto
AF frame setting, when
central area was set as AF
frame, focusing will be on
the center of the screen.
When Full Frame was set as
AF frame, focusing will be
calculated based on the full
screen
PTZ Assist On / Off
Turn on the auto focus
function in Manual
Ethernet
DHCP On / Off
Enable/Disable DHCP
setting using left and right
arrow keys and press
[ENTER] to apply setting.
IP Address 192.168.100.100
Press [ENTER] to be in
modify mode; select the item
to be modified using the up
and down keys, and modify
the value using the left and
right keys or the numeric
keys.
Subnet Mask 255.255.255.0
Press [ENTER] to be in
modify mode; select the item
to be modified using the up
and down keys, and modify
the value using the left and

Marshall Electronics CV630-IP Specifications

General

Megapixel	8 MP
Camera type	Single camera
Sensor type	-
Optical zoom	30 x
Zoom capability	Yes
Optical sensor size	1/2.5 \
Vertical field of view (wide)	70 °
Networking standards	IEEE 802.3at
Maximum frame rate	- fps
Supported video modes	720p, 1080p, 3840p
Video formats supported	H.264, H.265, HEVC
Maximum video resolution	3840 x 2160 pixels
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Pan range	0 - 340 °
Product color	Black
Tilt angle range	0 - 120 °