Safety Precaution
Make sure to turn off the power before installing VS-102-HDSDI.
Do not install under the direct sunlight or in dusty areas.
Make sure to use the product within the temperature and humidity specified in the specification.
Do not operate the product in the presence of vibrations or strong magnetic fields.
Do not put electrically conducting materials in the ventilation hole.
Do not open the top cover of the product. It may cause a failure or electric shock on the components.
To prevent from overheating, make sure to keep the distance at least 10cm from the ventilation hole.
Make sure the voltage is correct (220V/110V) before connecting the power.
We appreciate your purchasing VS-102-HDSDI.
To Next Page
Loading...