EasyManua.ls Logo

Marshall Electronics VS-102-HDSDI - Page 43

Marshall Electronics VS-102-HDSDI
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VS-102-HDSDI User Manual
IP Server Instruction Manual
43/61
Refer to the chart for checking the status of disk.
Disk status
Description
Disk error detected
Error
No disk
Disk is not connected to the system.
Searching Disk information
Checking the status of disk. Refresh the page and wait
until the status is changed.
Mounting and
Recovering Disk...
Performing recovery process when disk damage is found.
It takes from seconds to minutes for recovery.
Disk format needed
Disk is attached, but the type of the file system is
unknown or damaged.
Unknown disk type detected
USB Disk available
- (format is recommanded)
Disk or memory device is available,
but formatting is recommended.
USB Disk available Available to be used for recording.
Disk formatting – Start
Disk is being formatted.
System should not be turned off during formatting.
Disk formatting
– Progressing……
Disk formatting
– Writing inode tables 63/619
Disk formatting
– Creating journal……
Disk formatting
– Writing Superblocks……
Disk format done,
Please wait for reboot.
Disk removed
or in abnormal state
Disk is detached during operation or there is damage on
the file system. If it happens while the disk is connected,
it is recommended that you format the disk.