56/61
Remote T y pe
Normal: Connection for Marshall Encoder and Decoder
R TSP/R TP: The Decoder sy stem can ma ke a connection though R TSP protocol and get the stream
via R TP . It is also possible to ma ke a connection with other vendor s' H.264 IP cameras
supporting standard R TSP/R TP and a st andard H.264 algorithm.
T o ma ke an R TSP connection, set Remote T ype to “R TSP”, enter the R TSP URL of remote sy stem
to Remote Address, and the RTSP access port number to Remote Port. Currently, it support s only
video.
Media Protocol
Select protocol used for transmission of audio and video data between the remote system and the
decoder. The decoder system or VMS can choose media protocol among TCP, UDP, and Multicast.
Remote A ddress
Address of the remote sy stem to connect.
Port
Port of the remote sy stem t o connect.
Remote Channel
The channel can be selected when the remote sy stem has more than multiple video channels
To Next Page