Why does my Marshalltown FS13 shear require more force to cut?
If your Marshalltown Power Tool shear requires more force than usual to cut, try using a honing stone to carefully touch up the blade. Additionally, ensure you are following the maintenance section of the manual to properly oil and grease the shear.
What to do if Marshalltown FS13 Power Tool shear leaves a jagged edge?
If your Marshalltown Power Tool shear is leaving a jagged edge on flooring, use a honing stone to carefully touch up the blade. If necessary, employ the double cutting method.
How to fix a Marshalltown FS13 shear that won’t cut material?
To address this issue with your Marshalltown Power Tool, first review the cutting guide in the manual to confirm the material is approved for cutting. Avoid using excessive force. If problems persist, contact Marshalltown customer service for further assistance.
General| Brand | Marshalltown |
|---|---|
| Model | FS13 |
| Category | Power Tool |
| Language | English |
Highlights key features like quiet operation, dust-free cuts, material capacity, and adjustable fence.
Emphasizes reading instructions, safety observance, and manufacturer's rights regarding product changes.
Explains the meaning and importance of DANGER, WARNING, and CAUTION safety signs.
Covers operator responsibility, work area, and avoiding hazards like loose clothing or impaired operation.
Details on component integrity, parts replacement, protective gear, and material handling.
Informs about potential chemical exposure related to California's Proposition 65.
Lists the necessary tools, including screwdrivers and a hex wrench.
Identifies main parts (A-E) and hardware items (F-L) for assembly.
Step-by-step guide for preparing, positioning, and cutting material.
Instructions for adjusting the fence for angled cuts.
Method for achieving cleaner cuts on challenging materials.
Lists common materials like laminate, LVT, and fiber cement board that can be cut.
Advises against cutting materials with Janka Hardness Rating over 1300.
Visual diagram illustrating all shear components with reference numbers.
Procedure for sharpening the shear blade using a honing stone.
Step-by-step instructions for safely removing and installing a new blade.
Recommendations for lubricating the shear to ensure performance and longevity.
Resolves issues with material cutting, jagged edges, or excessive force.
Addresses problems with increased force required for cutting or general operation.
To Next Page
