Martha Stewart HOLLS - User Manual

Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Page 1 of 2
Parts List
Step 1:
Assemble the chair on a flat and soft surface either on a carpet or cloth to prevent the finish from
scratching. You open the box and will see the hardware package and components.
8
1
Item
Hardware List
Description
QTY
1
4
Item
Description
QTY
P1
P2
LEGS

Summary

Important Safety Instructions

Pre-Assembly Checks

Assembly Procedures

Attach Legs to Chair Top

Attach the front and back legs (P2) to the chair top (P1), tightening all bolts securely.

Final Chair Placement

Turn the assembled chair upright on a level surface to complete the assembly.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Important Safety Instructions and Disclaimers

This document provides assembly instructions for the Martha Stewart Holls Dining Chair.

Function Description:

The Martha Stewart Holls Dining Chair is a piece of furniture designed for seating, primarily for dining purposes. It is intended to be assembled by the user following the provided step-by-step instructions.

Important Technical Specifications:

The chair consists of two main components:

• P1: CHAIR TOP - This is the main body of the chair, including the seat and backrest.
• P2: LEGS - There are four legs provided for the chair.

The hardware required for assembly includes:

• H1: Bolts 5/16" x 2-1/6" (Quantity: 8) - These are the primary fasteners for attaching the legs to the chair top.
• H2: Lock Washers 5/16" (Quantity: 8) - These washers are used with the bolts to help prevent them from loosening over time due to vibration or movement.
• H3: Flat Washers 5/16" (Quantity: 8) - These washers provide a smooth bearing surface and distribute the load of the fastener over a wider area, protecting the chair's finish.
• H4: Allen Wrench (Quantity: 1) - This tool is provided for tightening the bolts.

Usage Features:

• Assembly Required: The chair is shipped unassembled and requires the user to follow a multi-step process to put it together.
• Two-Person Assembly Recommended: For safety and ease, the instructions recommend assembly by two or more adults. This suggests that some components might be bulky or require steady handling during the process.
• Protective Assembly Surface: Users are advised to assemble the chair on a flat and soft surface, such as a carpet or cloth, to prevent scratching the finish of the components.
• Secure Fastening: The assembly process involves attaching the legs to the chair top using bolts, lock washers, and flat washers, which are then tightened with an Allen wrench. After tightening, a black fabric cover is to be closed, likely to conceal the hardware and provide a finished look.
• Final Placement: Once assembled, the chair should be turned upright and placed on a level surface.

Maintenance Features:

• Periodic Inspection and Re-tightening: A crucial safety and maintenance feature highlighted is the recommendation to periodically inspect and re-tighten the bolts. This is because bolts may loosen during normal everyday use, and ensuring they are kept tightened helps prevent damage or injury. This proactive maintenance is essential for the longevity and safety of the chair.
• Future Reference: Users are advised to keep the assembly instructions for future reference, which would be useful for re-tightening hardware or if the chair ever needs to be disassembled or moved.

Important Safety Instructions and Disclaimers:

• Read Instructions Carefully: Users must read all instructions carefully before beginning assembly.
• Do Not Discard Contents Prematurely: It is important not to discard any packaging or contents until assembly is complete to avoid accidentally discarding small parts or hardware.
• Remove All Parts from Box: All parts and hardware should be taken out of the box before starting assembly.
• Seller Disclaimer: The document includes a disclaimer stating that "WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE." This emphasizes the importance of following the instructions precisely for safe and intended use and limits the seller's liability for improper assembly.

Martha Stewart HOLLS Specifications