To Next PageTo Next Page
Need help?Do you have a question about the Martha Stewart The Everyday System and is the answer not in the manual?
General| Brand | Martha Stewart |
|---|---|
| Model | The Everyday System |
| Category | Indoor Furnishing |
| Language | English |
Unit must be anchored to the wall for safety.
Prevent children from climbing or hanging on the unit.
Ensure level feet touch ground and follow assembly guidelines.
Check ceiling height and trim thickness for installation.
Do not reuse parts for wall bracket attachment.
List of tools needed for upright installation.
Prepare the installation area by clearing and repairing.
Find the highest point on the floor to set the system height.
Use the wall template to correctly space and mark upright positions.
Mark all necessary upright hole locations using the template.
Place upright on bracket and partially secure with screws.
Adjust levelers to ensure the system is stable and level.
List of tools necessary for bracket installation.
Assemble the bracket components as shown in the diagrams.
Install the bracket cover correctly, avoiding use with drawers.
Securely attach the assembled bracket to the upright.
List of tools necessary for shelf installation.
Assemble the shelf bracket components as shown in the diagrams.
Install the shelf bracket cover, ensuring correct placement.
Securely attach the shelf bracket to the upright.
Position and secure the shelves onto the installed brackets.
List of tools necessary for cabinet installation.
Securely attach the cabinet bracket to the upright.
Install the drawer slides onto the cabinet brackets.
Assemble the drawer components and attach them to the slides.
Insert the assembled drawers and secure the cabinet.
Add remaining shelves and install the mesh baskets.
Attach brackets to uprights and install the closet rod.
