Copyright © 2020 Martin Audio Ltd. 18
DDX USER GUIDE V1.0
DDX USER GUIDE
DSP and Amplication
DX0.5
The DX0.5 is a professional two-input, six-output loudspeaker management system.
The DX0.5 provides crossover functions, five parametric/shelving filters on each input and seven filters on each output. Level control,
muting and delay are available on all inputs and outputs, along with the output limiters which are critical for correct driver protection. With
24 memory locations in the unit suitable for storing presets for each DDX model.
The full DX0.5 User Guide is available online at www.martin-audio.com and includes numerous examples of system wiring.
DX4.0 and iKON Ampliers
DDX loudspeakers can also be used with DX4.0 or iKON amplifiers. When connected to these devices via a network and running VU-NET
software on a PC, you can recall presets from the amplifier for each type of loudspeaker.
Using Alternative Processors
You can download our loudspeaker parameter spreadsheet from the support section of our website. This provides detailed settings for all
models including crossover, limiters and equalisation points. There are comprehensive instructions provided on the spreadsheet and a
video guide is also available in the same location of the website.
To Next Page
Loading...
Need help?
General
