Copyright © 2020 Martin Audio Ltd. 8
DDX USER GUIDE V1.0
DDX USER GUIDE
Installation
Pole Mounting
When using poles or stands, the following precautions are advised:
• Ensure that the stand will support the weight of the loudspeaker by checking the stand manufacturers rating. (See the technical
specifications for individual DDX weights and dimensions.)
• Make sure that the stand is placed on a level surface and that its legs are fully extended.
• Do not place more than one loudspeaker on each stand.
• Run cables so that they do not present a trip hazard which could pull the loudspeaker over.
• When used outdoors in the wind, it may be necessary to add some weight to the base of the stand.
• When using a pole mount with a sub-bass system, observe similar precautions.
Stacking
• Ensure that the floor or stage is level and solid.
• Do not stack loudspeakers too high outdoors where winds could topple the stack.
• Be aware that loudspeakers producing very high sound levels can move or creep. To avoid this, place friction material between the floor
and loudspeaker and between each loudspeaker or use strapping to secure the stack.
To Next Page
Loading...
Need help?
General
