Martin MAC Quantum Profile User Manual (English)

Other manuals for Martin MAC Quantum Profile

Questions and Answers:

E
ehughesJul 27, 2025
What to do if Martin Spotlight fixtures reset but respond erratically?
- A
  Amanda MillerJul 27, 2025
  If Martin Spotlight fixtures reset correctly but respond erratically, it may be due to a bad data link. Inspect connections and cables, correcting poor connections and replacing damaged cables. It could also be that the data link is not terminated; insert a DMX termination plug in the data output socket of the last MAC Quantum Profile on the data link. Incorrect addressing of fixtures can also cause this issue, so check the fixture address and protocol settings. A defective fixture disturbing data transmission is another possibility. To check this, unplug the XLR in and out connectors and connect them directly together to bypass one fixture at a time until normal operation is regained. If this is the case, have the fixture serviced by a qualified technician.
S
Stacey GardnerAug 6, 2025
How to fix Martin Spotlight if light output cuts out intermittently?
- Y
  yhernandezAug 6, 2025
  If the light output of your Martin Spotlight cuts out intermittently, the fixture may be too hot. Allow the fixture to cool down, clean it, and reduce the ambient temperature.
J
johnkingAug 15, 2025
What to do if one or more Martin Spotlight fixtures are completely dead?
- C
  chandlerryanAug 15, 2025
  If one or more Martin Spotlight fixtures are completely dead, first check that power is switched on and cables are plugged in. If the issue persists, it may be due to a blown fuse or an internal fault. In this case, contact Martin™ Service or an authorized service partner.