4 Introduction MX-1 user manual
I
NTRODUCTION
1
Thank you for selecting the Martin MX-1. The MX-1 is an automated profile
spotlight that employs a 250 watt halogen lamp. It provides strobe effects,
continuous electronic dimming, 18 color/gobo effects, a moving-mirror with 230°
of pan and 76° of tilt, adjustable focus, a 16° beam angle, and a variety of control
options.
The MX-1 is not for household use. It is not for children: it presents risks of injury
due to electric shock, burns, falls, high-intensity light, and fire. For safe operation,
read this manual before powering or installing the fixture, follow the safety
precautions listed below, and observe all warnings printed in this manual and on
the fixture. If you have questions about how to operate the fixture safely, please
contact your Martin dealer or call the Martin 24-hour service hotline for
assistance.
SAFETY PRECAUTIONS
• ALWAYS disconnect the fixture from AC power before opening the fixture or
removing any part.
• ALWAYS keep combustible materials (for example fabric, wood, paper) at
least 10 centimeters (4 inches) away from the fixture.
• ALWAYS ground (earth) the fixture electrically.
• ALWAYS allow the lamp to cool at least 5 minutes before removing the lamp
assembly.
• ALWAYS, when suspending the fixture above ground level, secure it with an
approved safety cable.
• ALWAYS refer service to a qualified technician.
• ALWAYS provide a minimum clearance of 10 centimeters (4 inches) around
the fan and air vent.
• ALWAYS block access below the work area when rigging, derigging, or
servicing fixtures.
• NEVER place flammable materials anywhere near the fixture.
• NEVER expose the fixture to rain or moisture.
To Next Page
Loading...
