MX-1 user manual Introduction 5
• NEVER illuminate surfaces within 0.3 meters (12 inches) of the fixture.
• NEVER operate the fixture if the ambient temperature (Ta) exceeds 40° C
(104° F).
• NEVER place filters or other objects over the lens or mirror.
• NEVER stare directly into the light.
• NEVER operate the fixture without all parts installed.
• NEVER modify the fixture or install other than genuine Martin parts.
UNPACKING
The packing material is carefully designed to protect the fixture during shipment
- always use it to transport the fixture.
The MX-1 comes with:
• 1 3-meter, 3-wire IEC power cable
• 1 user manual
Important! The mirror assembly is secured for transport with a plastic tie.
Cut and remove the tie before use.
To Next Page
Loading...
