Need help?Do you have a question about the Martin RoboColor Pro 400 and is the answer not in the manual?
Power and Consumption| power and current consumption | 250 W, 290 VA, 1.3 A at 230 V |
|---|---|
| AC voltage and frequency (EU model) | 230V/50Hz, 240V/50Hz, 250V/50Hz |
| AC voltage and frequency (US model) | 210V/60Hz, 225V/60Hz, 225V/50Hz |
Lighting Specifications| lamp type | Philips MSD 200 |
|---|---|
| beam angle with standard lens | 21° |
| beam angle with optional wide angle lens | 33° |
Weight and Dimensions| length including bracket | 306 mm (12.0") |
|---|---|
| width including bracket | 337 mm (13.3") |
| height including bracket | 282 mm (11.1") |
| weight including bracket | 11.0 kg (24 lb) |
Guidance on preventing electric shock hazards during fixture operation and maintenance.
Precautions against UV radiation and risks of lamp explosion during fixture use.
Safety measures to prevent burns and fire hazards associated with the fixture.
Instructions to prevent injuries from falls during fixture installation or rigging.
Procedure for installing and replacing the fixture's lamp.
Steps for attaching and positioning the mounting bracket.
Guide for safely connecting the fixture to the power supply.
Instructions for establishing serial data links for fixture control.
How to set the control address for the fixture using DIP switches.
General operational procedures when using a controller.
Fine-tuning the lamp position for optimal light output and performance.
To Next Page
