Need help?Do you have a question about the Martin RUSH MH 1 Profile and is the answer not in the manual?
General| Type | Moving Head |
|---|---|
| Light Source | LED |
| Prism | 3-facet prism |
| Focus | Motorized |
| Pan | 540° |
| Tilt | 270° |
| Voltage | 100-240V AC, 50/60Hz |
| Control Protocol | DMX, RDM |
| Colors | RGB |
| Gobos | Rotating gobos |
| Dimmer/Shutter | Electronic dimmer, strobe |
| Control | DMX, Standalone |
Read safety precautions before installing, operating, or servicing the product.
Steps to follow before operating the fixture for the first time.
Securely attach the fixture to a hard, fixed, flat surface.
Clamping the fixture to a truss or similar rigging structure.
Instructions for connecting the fixture to AC mains power safely.
Description of the fixture's display, LEDs, buttons, and connectors.
Requirements and setup for controlling the fixture via DMX.
Navigating and using the fixture's control menus.
Setting the DMX starting channel for fixture control.
Viewing DMX values received by the fixture.
Defining fixture behavior when disconnected from DMX.
Selecting one of the four pre-programmed shows.
Setting focus points for gobo wheels 1 and 2.
Reversing pan and tilt directions for symmetrical effects.
Enabling and adjusting sensitivity for sound-activated shows.
Enabling/disabling automatic correction of pan/tilt position errors.
Inverting iris settings for specific effects.
Configuring blackout during gobo changes or movement.
Inverting the control panel display for overhead mounting.
Setting the display backlight to dim automatically.
Adjusting the brightness level of the control panel display.
Performing an automatic test of all fixture functions.
Manually testing individual fixture functions.
Checking fixture operating hours and firmware version.
Manually resetting effects to their home positions.
Restoring the fixture to its factory default settings.
Adjusting indexed home positions for various effects.
Details on pan and tilt movement and feedback.
Description of gobo wheels, static/rotating gobos, and shake function.
Adjustable iris for beam diameter and motorized focus for gobos.
Prism effects and strobe capabilities.
Intensity control and color wheel selections.
Procedures for cleaning the fixture to maintain performance.
Steps for replacing the fixture's primary fuse.
Process for replacing gobos with custom metal gobos.
DMX channels for controlling pan, tilt, speed, and dimmer.
DMX values for strobe effects.
DMX channels for Color Wheel 1.
DMX channels for Color Wheel 2.
DMX channels for Gobo Wheel 1 selection and rotation.
DMX channels for Gobo Wheel 2 selection and rotation.
DMX channels for prism, iris, focus, and fixture settings.
Settings for DMX address, mode, and value viewing.
Configuration for offline mode, show mode, and gobo focus.
Settings for sound trigger and microphone sensitivity.
Options for pan/tilt, iris, blackout, and display.
Menus for testing, operating hours, service countdown, and firmware.
Options to reset individual functions or all settings.
Menu for adjusting home positions of various effects.
Option to return all settings to factory defaults.
List of error messages and the conditions under which they appear.
Troubleshooting steps for no light or fan operation.
Resolving problems with the fixture not reacting to music.
Addressing unresponsive or intermittent control channels.
Troubleshooting fixture response to DMX control.
Dimensions, weight, and details of dynamic effects.
Specifics on effects, control, programming, optics, and construction.
Information on mounting, power/DMX connections, and electrical specs.
Power, thermal data, approvals, included items, and accessories.
Details on power connectors, installation hardware, and ordering.
Guidelines for recycling and disposing of the product.
To Next Page
