Martin JEM ZR series User Manual

user manual
P/N 35010042-D
READ AND SAVE THESE INSTRUCTIONS

Martin JEM ZR series Specifications

General

Brand	Martin
Model	JEM ZR series
Category	Light Fixture
Language	English

Summary

Dimensions and Legal Information

Safety Information

Preventing Electric Shocks

Follow safety precautions to avoid electric shock, burns, falls, and respiratory problems.

Preventing Burns and Fire

Details safety measures to prevent burns and fire hazards associated with fog machine operation.

Preventing Injuries

Provides guidance on safely installing, rigging, and operating the machine to prevent injuries.

Preventing Breathing Problems

Advises on safe use of fog fluid and ventilation to prevent respiratory issues.

Product Overview

Product Description

Details the JEM ZR series fog machines' flexibility, heating block, and control options.

Features at a Glance

Lists key features such as robust design, digital remote, DMX, and soft start technology.

Product Details

Illustrates the JEM ZR25 model with labels for key components like hanging bracket and fog nozzle.

Quick Start

Setting Up

Guides on locating the machine, filling the fluid tank, and connecting power for initial operation.

Making Fog

Explains how to adjust fog density and prime the machine if fog is not produced.

Installation and Setting Up

Location

Details placement requirements, suspension options, and clearance for the JEM ZR series machines.

AC Power

Covers grounding-type plugs, voltage checks, and correct wiring for power connection.

Setting Up

Instructions for filling fluid, connecting DMX, and linking machines for master-slave operation.

Final Checks

Lists critical checks before applying power to ensure safe and correct operation.

Turning On the Power

Details the process of powering on the machine and what to expect on the display.

Control Settings

Overview

Explains the integrated digital remote control and its removability for handheld use.

Setting Run Modes

Details how to set operational modes like Off, Standby, Timer, and Continuous.

Setting Fog Output Density

Describes how to adjust the fog output level from 0% to 100%.

Setting the Timer

Explains how to set RUN TIME and OFF TIME values for timed fog output.

Using the Settings Menu

Guides on accessing options like DMX address, brightness, and factory reset.

Setting the DMX Base Address

Covers setting the DMX start address from 001 to 511 or via RDM.

Display Back Light Setting

Allows adjustment of the display backlight brightness to LOW, NORM, or HIGH.

Setting the Master-Slave Link Mode

Details how to configure machines for master-slave operation using DMX cabling.

Priming the Machine After Fluid Out

Procedure to refill fluid tank and prime the pump after running out of fluid.

Resetting Options to Factory Settings

Explains how to restore the machine to its default factory settings.

DMX Control

Overview

Explains DMX as a digital control system for JEM ZR series machines and its interaction with standalone functions.

Connection

Details the 5-pin XLR connectors used for DMX connection and recommended cable types.

DMX Functions

Describes how DMX address setting must match the controller and the DMX control values for fog output.

Optional PLC Interface Control

Overview

Introduces the optional PLC interface for analog control of fog output and flow rate.

Approved Fog Fluid Types

Pro Smoke Studio Fluid (DX Mix)

A lighter, faster dispersing fluid for studio/theatre, less likely to interfere with TV cameras.

Pro Smoke Super (ZR Mix)

General purpose fluid for dense white fog with medium dispersal, good for atmospheric effects.

Pro Smoke High Density (SP Mix)

Generates high density, white fog with slow evaporation, ideal for scenic obscuring.

i-fog Fluid

Economical fluid with long hang time, suitable for scenic effects and 'white-outs'.

RUSH Fog Fluid ™™™

Economy fluid for medium-density effects with medium hang time, suitable for various venues.

Pro Steam Simulation

Light fluid for ZR45, creates well-defined vapour cones, ideal for chase effects.

ZR45 Temperature Settings

HIGH

Sets temperature for Pro Smoke High Density (SP mix) and i-fog fluids.

NORM

Sets temperature for Pro Smoke Super (ZR mix) and RUSH Fog Fluid.

LOW

Sets temperature for Pro Smoke Studio (DX mix) and Pro Steam Simulation fluids.

Pro Clean Supreme Fluid

Basic Service

Cleaning

Details how to clean the machine's exterior, vents, and fog output nozzle.

Fuse Replacement

Provides information on locating and replacing main and internal fuses for different models.

Troubleshooting

Machine Will Not Produce Fog

Addresses issues like machine not reaching temperature or fog output set to zero.

Machine Can Be Fired From Control Panel, But Not By DMX Controller

Covers DMX signal, address setting, and connection problems.

Fog Output Is Weak

Suggests checking priming, fluid type, and general machine condition.

Wet, Greasy, Non-Uniform Fog Output, Fluid Drips or Spits From Nozzle, Or Very Loud Noise When Firing Machine

Addresses issues like wet, greasy, or non-uniform fog output, drips, spits, or loud noise.

Machine Appears Dead

Troubleshoots power issues, checking the AC cable inlet and fuses.

Machine Causes DMX Errors to Occur on Other Units When Connected to a DMX System

Points to incorrect LINK menu settings causing DMX system errors.

Loss of Control from Remote

Focuses on communication issues between the remote and the machine.

Status Messages

Resetting the Machine After Fluid Out

Details how to refill the fluid container and follow priming instructions.

Technical Specifications

Physical

Lists dimensions, weight, and fluid capacity for ZR25, ZR35, and ZR45 models.

Performance

Provides data on coverage volume, fluid consumption, and ready time for each model.

Control and Programming

Details control options like remote, DMX, PLC, and control parameters for fog output.

Construction

Details housing, bracket, heat exchanger, fluid pump, and reservoir specifications.

Installation

Covers mounting options, clearance requirements, and orientation.

Connections

Lists connectors for AC power, DMX, remote control, and optional PLC interface.

Electrical

Specifies electrical ratings, main fuses, and voltage requirements for different models.

Typical Power and Current

Provides power consumption and current draw for EU and US models of ZR25, ZR35, and ZR45.

Thermal

Specifies maximum and minimum ambient temperatures, and nozzle temperature.

Approvals

Lists safety and EMC/Immunity approvals for EU and US models.

Included Items

Lists the components provided with the JEM ZR series machines.

Accessories

Lists optional accessories like PLC interface and ducting systems.

Approved Fluids

Lists approved fog fluid types for JEM™™™ series machines.

Installation Hardware

Lists hardware for mounting and suspension, such as clamps.

Service Tools

Lists specialized tools for service and calibration.

Ordering Information

Disposing of this Product