Control Settings
Ove rvi e w
The integrated digital remote control on the rear of the machine allows you to
configure it using option menus.
The integrated digital remote control may be removed from the unit
and used as a handheld remote control by removing the two hand
wheel bolts either side of the display. The display cable may be
extended up to 25 m (82 ft.) using standard 3-pin XLR cable.
Se tt i n g R u n m o de s
The RUN MODE menu sets the operational mode of the machine, and can also
be used to shut down the heater. Settings are Off (shutdown, heaters off),
Standby (heaters remain on), Timer mode or Continuous mode.
Use the Menu Previous / Next buttons to select the RUN MODE option.
Use the Up/Down buttons to select OFF, STANDBY, TIMER, CONTINUOUS.
Press the Enter button to store the setting. The display shows SET.
Selecting OFF will disable the heaters on the unit.
Se tt i n g F og o u t p u t d e ns it y
Use the Menu Previous / Next buttons to select the FOG LEVEL option.
Use the Up/Down buttons to select the density from 0% - 100%
Press the Enter button to store the fog setting. The display shows SET.
To Next Page
Loading...
Need help?
General
