Martin JEM ZR series User Manual

22
Approved Fog Fluid Types
T em pe r a t u r e Me n u
The different fluid types listed require correct selection of the relevant
temperature setting in the TEMPERATURE sub-menu of the SETTINGS menu.
Select the required temperature and press Enter to store.
The selected temperature setting will remain after power off and is indicated on
the display whilst in standby (TEMP=NORM) and also shows during manual
operation/DMX control (T=N).
TEMPERATURE Setting
Fluid Type
HIGH
Pro Smoke High Density (SP mix)
i-fog
NORM
Pro Smoke Super (ZR mix)
RUSH Fog Fluid
Pro Smoke Studio (DX mix)
LOW
Pro Steam Simulation

Martin JEM ZR series Specifications

General

Brand	Martin
Model	JEM ZR series
Category	Light Fixture
Language	English