Approved Fog Fluid Types
The JEM ZR series™ machines must only be used with the Martin™ fluids listed
below. Martin™ supplies high quality fog fluids that are based on ultra-pure
deionized water. No other fluid is suitable for use.
Pro Smoke Studio Flu i d (DX m ix)
In a studio or theatre environment, a lighter, faster dispersing fog is often
preferred. Pro-Smoke Studio offers a less dense environment to Pro-Smoke
Super and is therefore less likely to interfere with TV camera focusing.
Pro Smoke Supe r (ZR m ix)
Pro Smoke Super fluid is a high-quality, general purpose fluid that produces a
dense white airborne fog with medium dispersal time. Its medium to high index
of refraction permits both good atmospheric effects and denser “white-outs”.
Pro Smok e High Densit y (SP m ix)
Pro Smoke High Density fluid generates a high density, white, airborne fog with
a very high index of refraction and slow evaporation rate. It is well suited for
scenic obscuring, dramatic strobe effects, and “white-outs”.
i-f o g F l uid
i-fog is not only kind to your lights, but is also more economical to use thanks to
its incredible long “hang time” characteristics.
It is well suited for scenic obscuring, dramatic strobe effects, and “white-outs”.
RUSH F og F l uid ™
RUSH Fog Fluid™ is a specially formulated water-based fog formula and is
recommended for use with applicable Martin fog effect generators. While
economical it is perfect for medium-density airborne fog effects with medium
hang time and leaves no residue; RUSH Fog Fluid™ is designed as an economy
fluid that is suitable for use in nightclubs, bars, stage and outdoor events.
*Please note that use of RUSH Fog Fluid™ in a JEM™ series fog machine will produce a
less than expected professional quality effect due to the nature of using an entry level fog
effect fluid.
Pro Steam S i m ula t i o n
DANGER! The JEM ZR series™ machines can run safely only on the specific
fog fluids they are designed for. Use ONLY the Martin™ fog fluids designated
in this manual. NEVER use any other type of fluid, or toxic gas may be
produced. You will probably also cause damage to the machine that will
invalidate the product warranty. Do not dilute fog fluid with water or any other
liquid. Discard fog fluid if it becomes contaminated.
To Next Page
Loading...
Need help?
General
