EasyManuals Logo

Martin JEM ZR series User Manual

Martin JEM ZR series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
capable of bearing a static suspended load that is ten times the weight
of the machine and all installed accessories.
Check that all external covers and rigging hardware are securely
fastened.
Block access below the work area and work from a stable platform
whenever installing, servicing or moving the machine.
Do not operate the machine with missing or damaged covers or shields.
In the event of an operating problem, stop using the machine
immediately and disconnect it from power. Do not attempt to use a
machine that is obviously damaged.
Do not modify the machine in any way not described in this manual or
install other than genuine Martin parts.
Refer any service operation not described in this manual to a qualified
technician.
Fog output can cause condensation. Do not point the output at smooth
floors. Floors and surfaces may become slippery. Check these
frequently and wipe dry as necessary to avoid any danger of slipping.
Ensure at least 2 m (6.6 ft.) visibility in areas where fog is being
produced.
Fog fluid contains food-grade glycols in solution but may present health
risks if swallowed. Do not drink it. Store it securely. If eye contact
occurs, rinse with water. If fluid is swallowed, give water and obtain
medical advice.
This appliance is not intended for use by persons (including children)
with reduced physical sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
Preve nting b r ea t h ing pr o ble ms
A machine can operate safely only with the fog fluid it is designed for.
Use the machine only with fluids specified under “Approved fluid types
on page 21 or you may cause the release of toxic gases, presenting a
severe health hazard. You will also probably damage the machine.
Do not create dense fog in confined or poorly ventilated areas.
Do not expose people with health problems (including allergic and/or
respiratory conditions such as asthma) to fog output.
Do not point fog output directly at a person’s face or at face height.
For the latest user documentation and other information for this and all Martin™
products, please visit the Martin website at http://www.martin.com
If you have any questions about how to install, operate or service the fixture
safely, please contact your Martin™ distributor (see www.martin.com/distributors
for details) or call the Martin™ 24-hour service hotline on +45 8740 0000, or in
the USA on 1-888-tech-180.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Martin JEM ZR series and is the answer not in the manual?

Martin JEM ZR series Specifications

General IconGeneral
BrandMartin
ModelJEM ZR series
CategoryLight Fixture
LanguageEnglish

Related product manuals