Need help?Do you have a question about the Marus TL 500 and is the answer not in the manual?
General| Brand | Marus |
|---|---|
| Model | TL 500 |
| Category | Lighting Equipment |
| Language | English |
Explains symbols used in the manual for warnings and information.
Guidance on proper disposal of the device according to local regulations.
Recommendations for operating medical devices safely around radio telephones and EMI sources.
Advises using only manufacturer-approved devices and accessories for product safety.
Information on how to request technical documents like circuit diagrams from the manufacturer.
Details on identifying the product via its label, including model, serial number, and specifications.
Specifies acceptable temperature and humidity ranges for storing the equipment.
Critical warnings and cautions regarding equipment operation, electrical safety, and servicing.
Describes the dental light's purpose, functionality, and illumination source.
Lists common replacement parts for the dental light, such as bulbs and fuses.
Details safety markings and the product's classification under medical device regulations.
General guidance and diagrams for installing the track light in dental environments.
Provides diagrams and instructions for mounting the light on suspended ceilings.
Illustrates methods for mounting the track parallel or perpendicular to ceiling joists.
Outlines electrical service line requirements and the recommendation for a wall switch.
Provides step-by-step guidance for installing the TL 500 Track Light assembly.
Instructions for adjusting the horizontal and vertical rotation of the light head.
Steps for adjusting the third axis rotation of the light head using a pivot nut.
Guidance on checking and adjusting the light's focus, typically after bulb replacement.
Explains the three-position switch for light control and the optional auto-switch function.
Step-by-step guide for safely removing and replacing the light bulb, including precautions.
Instructions for repositioning the auto-switch assembly to change activation points.
Procedures for adjusting the vertical and horizontal tension of the flex arm for stable positioning.
Guidelines for cleaning the dental light, including acceptable and unacceptable disinfectants.
Specific instructions for cleaning the glass reflector, plastic cover, and painted surfaces.
Provides detailed dimensions and articulation range for the TL 500 Track Light.
Details the articulation and movement capabilities of the light head itself.
Identifies components within the track light power supply for service purposes.
Shows internal components of the light head, such as bulb replacement and switches, for servicing.
Presents wiring diagrams for both 115V and 230V power supplies of the TL 500 Track Light.
Information on EMC compliance, immunity tests, and guidance for safe operation in electromagnetic environments.
A checklist to verify proper installation and servicing of the light unit.
Fields for recording product model, serial number, purchase date, and dealer information.
A section for logging notes and recording the service history of the equipment.
To Next Page
