M
A
R
A
T
H
O
N
29 28 32
30
33
24
24
26
27
25
REMOVING UPPER CAP
FIG. 1
(r.h. fork leg)
Undo screw (29) with an Allen wrench and
remove knob (28).
(l.h. fork leg)
Completely undo knob (32).
Depressurize each fork leg (see section
ADJUSTMENT).
FIG. 2 (only right leg)
Remove the RH cartridge circlip (27) with
a small screwdriver.
Remove and keep the pin (26) and counter
spring (25).
WARNING: never use the fork with-
out this component otherwise the
hydraulic cartridge fitted to the slider bot-
tom might slide out from the top cap and
release the arch-slider monolith.
FIG. 3
Unscrew the caps (30) and (33) complete
with O-ring (24) with a 21-mm socket
wrench.
Remove the cap (30) from the right stan-
chion and from the hydraulic cartridge rod
(5).
To Next Page
Loading...
