Marzocchi MX Comp ETA 2005 - User Manual

2005 - MX Comp ETA
Technical instructions
© Marzocchi Suspension
2005 - MX Comp ETA

Summary

Marzocchi MX Comp ETA Technical Instructions

Exploded View MX Comp + ETA 85

Exploded View MX Comp + ETA 105

Exploded View MX Comp + ETA 120

Technical Characteristics

Instructions for Use and Safety Warnings

General Safety Rules

General safety rules for handling and maintaining Marzocchi forks.

Fitting the Fork onto the Frame

Installing the Disk Brake

Dismantling Top Caps

Removing the Top Right Cap

Procedure for removing the top right cap of the fork.

Removing the Top Left Cap

Procedure for removing the top left cap of the fork.

Draining the Oil

Steering Crown and Arch-Slider Assembly Dismantling

Dismantling Right Pumping Element and Valve

Dismantling the ETA Cartridge

Removing Fork Seals

Removing Guide Bushes

Assembling Guide Bushes

Assembling Fork Seals

Assembling Right Pumping Element and Valve

Assembling the ETA Cartridge

Reassembling Steering Crown and Arch-Slider Assembly

Filling with Oil

Assembling Top Right Cap

Assembling Top Left Cap

Setting: General Rules for Calibration

Setting: SAG

Setting: Positive air

Setting: Rebound Adjustment

Setting: ETA (Extended Travel Adjustment)

Marzocchi MX Comp ETA 2005 Specifications

General

Model Year	2005
Intended Use	Cross Country
Travel	100 mm
Spring Type	Coil
Damping	Open Bath
ETA	Yes
Steerer Tube Diameter	1 1/8 inch
Wheel Size	26 inch
Color	Black, Silver
Adjustments	Rebound, Preload
Axle Type	Quick release
Brake Mount	IS