Masimo EMMA User Manual

4 Preparations for Use
4.1 Setting up
Unpack and inspect EMMA for external damage. Please contact your local distributor in case of damage.
1. Press the battery cover release button into the EMMA sensor body until the battery cover pops
off.
Figure 4. Releasing the battery cover
2. Open the battery compartment and insert two (2) AAA batteries. Make sure the batteries are
fitted according to the indicated polarity. After battery installation, snap the battery cover back
into place.
Figure 5. Inserting batteries
12(32)

Masimo EMMA Specifications

General

Parameters	EtCO2, Respiration Rate
Measurement Range	0-150 mmHg
Display	LCD
Battery Life	Up to 4 hours of continuous operation
Weight	200 grams
Technology	Infrared spectroscopy
EtCO2 Range	0 to 150 mmHg
Respiration Rate Range	0-99 breaths/min
Sampling Method	Mainstream