FEATURES AND CONTROLS
Dump Bed and winch
When need to dump, firstly, open the rear door of
cargo box, then press main switch to“ON” position,
and press “DUMP” to “UP”, cargo box will be up
backwards; And stop after releasing the press; While
press “DUMP”to” DOWN”, the cargo box will be back.
And stop after when release the press.
When vehicle stuck in the mud, the self-rescue could be done by utilizing the front fix stuff or peg.
Press “SWITCH” to “ON” position, and then press “WINCH” to “OUT” or “IN”, the winch cable can
be strech out and in.
Warning: Set the main switch back to “OFF” when finish dumping and winching in void being power
wasting.
When cargo box reaches the top or bottom, or the winch cable to the ends, please stop pushing the
button at once in case to damage the motor switch.
To Next Page
Loading...
