MAINTENANCE
Spark Plugs
Spark Plug Gap/Torque
Electrode Gap
Plug Tightening Torque
0.8-0.9 mm 12.5 ft. lbs. (17.5 Nm)
NOTICE: Using non-recommended spark plugs can result in serious engine damage. Always use our
company recommended spark plugs.
Spark plug condition is indicative of engine operation. The spark plug firing end condition should be
read after the engine is warmed up and the vehicle is driven at higher speeds. Immediately check the
spark plug for correct color.
A hot exhaust system and engine can cause burns. Wear protective gloves when removing a
spark plug for inspection.
Specified spark plug: DPR7EA-9.
Spark Plug Removal and Replacement
1.Remove the spark plug cap.
2.Using the spark plug wrench provided in the tool kit, remove the plug by rotating it
counterclockwise.
3.Reverse the procedure for spark plug installation.
To Next Page
Loading...
