MAINTENANCE
Brakes
Always check brake pedal travel and the brake fluid reservoir level before each use of the vehicle.
When applied, the brake pedal should feel firm. Any sponginess would indicate a possible fluid leak or
low brake fluid level, which must be corrected before riding. See page 73 for brake fluid information.
If you discover any irregularities in brake system operation, including excessive pedal travel,
contact your dealer for proper diagnosis and repairs.
Operating the vehicle with a spongy brake pedal can result in loss of braking, which could cause an
accident resulting in severe injury or death. Never operate the vehicle with a spongy-feeling brake pedal.
Brake Inspection
1. Check the brake system for fluid leaks.
2. Check the brake pedal for
excessive travel or a spongy
feel.
3. Check the friction pads for
wear, damage and looseness.
4. Inspect the brake pad wear
surface for excessive wear.
5. Change pads when worn to
3/64" (1 mm).
To Next Page
Loading...
