OPERATION
New Operator Driving Procedures
1. Read and understand the owner's manual and all warning and instruction labels before operating this
vehicle.
2. Review the section of this owner’s manual about starting the engine, stopping the engine, braking
and parking (pages39-40).
3. Perform the pre-ride inspection (page 37).
4. Wear appropriate riding gear, including an approved helmet and eye protection (goggles or face
shield).
5. Select a level open area to practice driving.
6. Sit in the driver's seat and fasten the seat belt.
7. Do not carry a passenger until you have at least four hours of driving experience with this vehicle.
(See page43).
8. Set the parking brake.
9. Place the transmission in neutral.
10. Start the engine.
11. Apply the brakes and shift into gear.
12. Release the parking brake.
To Next Page
Loading...
