（III）Malfunction in running system, suspension and steering organization
Running is
leaning
Running
system
①Air pressure in left and right wheel is different
②Load of left and right wheel is different
③Spring force of left and right absorbing spring
④Front wheel location is wrong
⑤One side wheel is locked or brake could not
release
⑥Front and rear suspension parts have been
loosened, bent or damaged
Adjust air pressure in tyre
Adjust load
Adjust or Change
Check or adjust
Repair arrester
Screw or Change
suspension parts
Tyre is
abraded
abnormally or
greatly
Steering
organiza-
tion,
running
system,
suspension
①Left and right absorber has been damaged,
spring force is short
②Tyre is not balance, and wheel hub is distorted
③Front wheel location is wrong
④Vehicle is over-load
⑤Tyre has not change its position
⑥Wheel hub bearing has been damaged or
adjustment is wrong
⑦Wheel assembly jump (axial, radial) is too
great
⑧Air pressure in tyre is too hig or too low
Adjust or Change
Change
Check or adjust
Check load
Change
Adjust or Change
Change
Adjust air pressure in tyre
To Next Page
Loading...
