1. When the vehicle is not used for a
month or longer, remove the
battery and store it in a cool, dark
place. Completely recharge the
battery before reinstallation.
The injectors were set at the factory
after many tests. If the settings are
changed by someone without
sufficient technical knowledge,
2. Always make sure the connections
are correct when putting the battery
Do not connect the negative lead of
the jumper cable to the negative
terminal of the battery in the
●
Be especially careful not to:
●
Touch the positive lead of the
jumper cable to the negative lead.
●
Reverse the polarity of the jumper
cables when connecting to the
batteries. This could cause the battery
to explode and severe injury.
All of the electrical circuits on your
UTV have fuses to protect them from
damage caused by excess current flow
To Next Page
Loading...
