Massimo MSU 800-5 - Warming up; Shifting: Neutral to Reverse

- 76 -
5. Start the engine.
6. After the engine starts, disconnect
the negative lead of the jumper
cable from the vehicle and charged
battery, then disconnect the
positive lead of the jumper cable
from the charged battery and the
battery in the vehicle.
7. Install the battery compartment
cover.
8. Put the seat back in place.
Warming up
To get maximum engine life, always
warm up the engine before starting off.
Never accelerate fast with a cold
engine!
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off
the gas pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice
versa by moving the drive select lever
along the shift guide.
4. Check behind for any people or
obstacles, and then release the
brake pedal.
5. Press the gas pedal gradually and
continue to watch to the rear while
backing.