EasyManua.ls Logo

Massimo MSU 800-5 - Vehicle Operation; Starting and Operating Instructions

Massimo MSU 800-5
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 65 -
Starting and Operating
Instructions
Before starting the engine, be sure
that the driver is seated properly in
the UTV and tighten the seat belts.
Test the UTV in an open area at the
beginning to learn how to start, turn
and stop.
Operate the UTV slowly until you
become familiar with it. The turning
radius on this vehicle is very small,
so the centrifugal force is very high
when turning at a high speed. Slow
down around corners or turns to
reduce the risk of overturning your
UTV.
Auxiliary DC jack
The auxiliary DC jack is located at the
right side of the front panel. This jack
can be used for suitable portable
players. Only use the DC jack while
engine is running.
1. Auxiliary DC jack cable
1. Set the light switch to “OFF”.
2. Start the engine.
3. Open the auxiliary DC jack cap, and
then insert the accessory power plug
into the jack.

Table of Contents

Related product manuals