Before operating the vehicle, check
the shift lever as to change gearshift
from 1 to 5 and reverse smoothly.
The shift lever should be vertical
when the gear is in neutral. If not,
adjust the shift cable and then tighten
the nuts of the shift cable.
The first month is most important in the
life of your vehicle. Proper operation
during this break-in period will help
ensure maximum life and performance
from your new vehicle. The following
guidelines explain proper break-in
1、After the engine starts, the engine
should not go above 5000rpm for the
2、Drive vehicle slowly, do not accelerate
quickly for the first 20 hours.
3、Avoid slamming the brakes.
4、Do not exceed the vehicle speed on
To Next Page
Loading...
