Cleaning
Pour cleaning solution or an equivalent
into a bucket. Put the filter in to soak.
While filter soaks, clean inside the air
filter housing.
Rinse the filter with warm water until all
cleaning solution disappears.
Then, let the filter dry completely.
Installation
Properly reinstall removed parts in the
reverse order of their removal.
Drive Belt
See an authorized ODES dealer to
check the width and the condition of
drive belt.
CVT Cover Drain Screw
Any time you suspect that water has
entered the CVT cover, drain the CVT
housing by removing the drain screw.
To Next Page
Loading...
