To wear the seat belt properly, do the
1. Hold the latch plate as you pull the
belt across your lap and chest.
Make sure the belt is not twisted
and is not caught on any portion of
the vehicle, your clothing, or any
equipment you are carrying.
2. Push the latch plate into the buckle
until it clicks. Pull up on the latch
plate to make sure it is secure.
3. Put the lap portion of the belt low on
your hips. Push down on the buckle
end of the belt as you pull up on the
shoulder part so the belt is snug
4. Position the shoulder belt over your
shoulder and across your chest. The
shoulder belt should fit against your
chest. If it is loose, pull the belt out all
the way and then let it retract.
5. To release the buckle, firmly press the
1. Buckle 2. Release button.
To Next Page
Loading...
