Improper maintenance of this UTV or
failure to correct a problem before
driving can cause a crash resulting in
Always perform an inspection before
every drive and correct any problems.
The following items need to be
checked before you get on the UTV:
Look for any leaks. Check the level
of oil and add if needed.
Check for leaks. Add coolant if needed.
Check the level and add fuel if needed.
Make sure the fuel cap is securely
fastened. Check for leaks.
Use a gauge to check the tire
pressure. Adjust if needed. Also look
for signs of damages or excessive
Check the wheels to see that the axle
● Underbody & Exhaust System
Check for, and remove any dirt, brush
or other debris that could be a fire
hazard or interfere with the proper
To Next Page
