7.3 Battery Power Detection Function: The meter has a
battery power detection function. Battery power includes four
levels and displays on the LCD screen. When “ ” displays
for battery, please replace battery. This meter uses 8 × 1.5V
Size AA battery. Batteries with the same model should be used
for battery replacement. Please remember that you can’t use
the meter until the rear cover is tightened.
8. Upper Computer Software Installation
Open CD
Click LCR_TERSTER.MSI to enter the following screen
based on the diagram.
Click NEXT to enter the next screen
Click change to select the position to be changed
To Next Page
Loading...
