The first time you take both earphones out of their case they will enter
pairing mode.
STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW07 PLUS R.
STEP 3: When prompted by your device, confirm connection.
To manually activate pairing mode, hold down the multi-function button until
the indicator light starts pulsing/pairing tone is heard. NOTE: if you are
already connected to a device, remove the earphones from your ears to
avoid activating your Voice Assistant.
Dual microphones in each earphone provide the freedom to listen or talk
with just one earphone.
PAIRING
5
PROXIMITY SENSOR
CHARGING
PINS
PULSING
INDICATOR
LIGHT
MULTI-FUNCTION
BUTTON
To Next Page
Loading...
