EasyManua.ls Logo

Master & Dynamic MW09 - Troubleshooting Pairing; Earphones and Source Device Issues

Master & Dynamic MW09
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TEMPERATURE RANGE
EN
9
Operate and store this product within the temperature range of 14°F to
113°F (-10°C to 45°C) only. Charge the battery where the temperature is
between 41°F and 95°F (5°C and 35°C) only.
Replacement parts and cables can be purchased at:
www.masterdynamic.com
TROUBLESHOOTING
TROUBLE PAIRING EARPHONES AND
SOURCE DEVICE
Make sure both earphones are outside the charging case when
attempting to pair your device. Cycle power by placing earphones in the
charging case and fully closing the lid for 10 seconds. Then remove the
earphones from the case to verify they have entered pairing mode. The
indicator light will slowly pulse on the right earphone.
Turn Bluetooth OFF, then ON again on the source device.
Turn OFF Bluetooth feature on any other device that is paired with
the earphones.
Delete any “M&D MW09” earphone connections from your device and
then put your earphones into pairing mode and pair again.
Make sure “M&D MW09” is selected in the Bluetooth device list.

Related product manuals