Page 16
MAINTAINING A BATTERY
This unit maintains both 6 and 12 volt batteries, keeping them at full
charge. It is not recommended for industrial applications.
NOTE: The maintain mode technology allows you to safely charge
and maintain a healthy battery for extended periods of time. However,
problems with the battery, electrical problems in the vehicle, improper
connections or other unanticipated conditions could cause excessive
current draws. As such, occasionally monitoring your battery and the
charging process is required.
13. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Battery ring
terminals do
not spark
when touched
together.
The charger is equipped
with an auto-start
feature. It will not supply
current to the battery
ring terminals until
a battery is properly
connected. The ring
terminals will not spark
if touched together.
No problem; this is a
normal condition.
Both LEDs
come on for 2
seconds, then
turn off.
The charger is plugged
into an AC outlet.
No problem; this is
normal.
To Next Page
Loading...
