e
9. For right panel (P), there are six screws
(BB) to connect to the right rear panel (J) and
the main bottom panel (S), three in the rear and
three inside the cabinet. Insert the screws into
the aligned holes and tighten them. The three
screws inside the cabinet should be engaged
first. (Fig. 9)
10. For shelf board (N), there are four screws
(BB) to connect to the center panel (K) and
the right panel (P).
Insert the screws into the aligned holes and
tighten them. (Fig. 10)
Hardware Used
1/4-20 x 5/8 in.
Screw
X 6
BB
Hardware Used
1/4-20 x 5/8 in.
Screw
X 4
BB
10
K
P
BB
N
9
J
P
BB
S
To Next Page
Loading...
