STEP 5,
Place grill body (4) ontoassembled
legs wi_h holes for grittlid to the back.
_ghtIy secure grill body to leg connec-
tors (6) using phillips head screws (A)
and hex flange nuts (B),
Do not fully tighten screws at this
time.
Carefufly reposltion grill as shown,
STEP 6.
Note: Do not over tighten, Air
damper should move freely,
Attach air damper (5) to body (4)
using phiUips head screw (F) and
lock nut (I) as shown.
Repeat step on opposite end.