Masterbuilt MCS 10B - User Manual

1
Welcome to the family. Let’s get started.
MCS 10B
CHARCOAL BULLET SMOKER
FUMOIR AVEC DES BOULES AU CHARBON DE BOIS
FUMADOR CON BOLAS DE MADERA CARBÓN
Manual applies to the following model number(s)
Le manuel s’applique aux numéros de modèle suivants
El manual se aplica a los siguientes números de modelo
These numbers are located on the rating label of the unit.
Le numéro de série se trouve sur la plaque signalétique de l’unité .
El número de serie se encuentra en la etiqueta de la unidad.
Mfg. Date - Serial Number | Date de fabrication - Numéro de série |
Fecha Fabricado - Número de serie
Your model number | Votre numéro de modèle | Su número de modelo
MB20060116, MB20060416, MB25060616
Please record this information immediately and keep in a
safe place for future use.
Veuillez noter cette information immédiatement et la
conserver dans un endroit sûr pour une utilisation future.
Por favor, registrar esta información inmediatamente y
guardar en un lugar seguro para su uso futuro.
IMPORTANT | IMPORTANTE
Manual Code: 9806170001 171003-GSB
Master it. Masterbuilt.

Masterbuilt MCS 10B Specifications

General

Brand	Masterbuilt
Model	MCS 10B
Material	Steel
Color	Black
Type	Vertical Charcoal Smoker
Power Source	Electric

Summary

Safety Warnings and Hazards

Carbon Monoxide Hazard

General Warnings and Dangers

Important information for assembly, safe use, and critical hazards like fire, explosion, and burn risks.

Structural Proximity and Safety Usage Recommendations

Maintain minimum distance from overhead construction, walls, rails, and combustible materials.

General Safety Information

Safe Operating Practices

Handling and Usage Precautions

Hot Surfaces and Steam Warnings

Smoker Operation Instructions

Getting Started

Pre-Seasoning Instructions

Detailed steps for curing the smoker to burn off manufacturing chemicals and oils.

Smoker Operation Details

Adding Wood Chips or Chunks

Operating Instructions

Step-by-step guide for charcoal setup, lighting, ash management, and temperature control.

Cleaning and Storing Instructions

Procedures for cleaning the smoker after each use and proper storage methods.

Hardware and Assembly Preparation

Hardware List

Assembly Prerequisites

Assembly Instructions

Step 1: Attach Legs to Main Body

Attaching the legs (8) to the main smoker body (1) using hardware (A).

Step 2: Secure Inner Brackets

Securing inner brackets (10) to the main smoker body (1) using hardware (A).

Step 3: Attach Top Supports

Attaching top supports (11) to the main smoker body (1) using hardware (A).

Step 4: Install Door

Step 5: Attach Handles and Brackets

Step 6: Secure Bottom Components

Step 7: Install Temperature Gauge

Step 8: Insert Grates and Water Bowl

Limited Warranty Information

Información de la Garantía Limitada