headline bars
continuation tabs
notes
warnings
model no. 054-8161-0 | contact us 1.800.689.9928
11
10
IMPORTANT INFORMATION
Before attempting to use this reciprocating saw, familiarize yourself with all of its operating features and safety
requirements.
ASSEMBLY AND ADJUSTMENT INSTRUCTIONS
INSTALLING AND REMOVING THE
BLADES
(fig 1)
1. Turn the tool-less blade clamp counter-clockwise.
2. Insert the blade into the slot of blade clamp.
3. Release the blade clamp to lock the blade.
WARNING!
• To avoid injury, ALWAYS turn the switch OFF and disconnect the reciprocating saw from the
power outlet before installing or changing the saw blade.
• When changing a blade immediately after operation, allow the blade to cool before
removing to avoid possible burning.
fig 1
ASSEMBLY INSTRUCTIONS
IMPORTANT INFORMATION
WARNING!
• Do not allow familiarity with your reciprocating saw to make you careless. Remember that
a careless fraction of a second is sufficient to inflict severe injury.
NOTICE: The blade may be installed with the teeth pointing either up or down, according to the needs of
the cutting operation.
To Next Page
Loading...
Need help?
General
