IMPORTANT INFORMATION
11
AIR-POWERED 3-IN-1 NAILER 058-8489-4
Compatible compressors
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with Mastercraft
®
air-powered tools. The compressor should
be able to supply a minimal air delivery of 4 SCFM @ 90 psi to ensure the compressor can run
continuously with the Mastercraft 3-in-1 Nailer.
General use
This Mastercraft
®
Air-powered 3-in-1 Nailer is an extremely versatile tool made of a strong and
lightweight die cast aluminium body. The tool drives three different types of fasteners, such as 1 ¼"
to 2 ½" (32 to 64 mm) long 16 gauge finishing nails, 5/8 to 2" (15 to 50 mm) long 18 gauge brad
nails, and 5/8 to 1 5/8" (15 to 40 mm) long 18 gauge staples. The tool has a rubber handle that
provides improved control and comfortable grip, even during extended use. This Mastercraft
®
Air-
powered 3-in-1 Nailer features a 360º air deflector and a touch-strike security system for improved
operator safety. It is best suited for installing door and window trims, decorative trim, small cabinet
work, finish work, paneling, and carpet.
Air compressor
Size & Power
1 1/2 – 2 HP 2 1/2 HP 3 HP and more
4 – 5 Gallons
Light-duty and
intermittent use
Light-duty and
intermittent use
Light-duty and
intermittent use
6 – 11 Gallons
Light-duty and
intermittent use
Heavy-duty and
continuous use
Heavy-duty and
continuous use
15 Gallons
and more
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Heavy-duty and
continuous use
To Next Page
Loading...
