MasterCraft 058-8489-4 User Manual

MAINTENANCE
21
AIR-POWERED 3-IN-1 NAILER 058-8489-4
Maintenance
•Air-operated tools must be inspected periodically and worn or broken parts must be replaced
in order to ensure that the tools are operating safely and efficiently.
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the air compressor before performing maintenance/
service, adjusting, clearing jams, reloading, and when it is not in use.
Repairs must be performed by a qualified service technician only. Failure to
comply will lead to serious injury, or loss of life.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM SERVICE INTERVAL
Each use or
every 2 hrs.
Monthly
As
needed
General inspection -
free movement
Trigger, spring,
safety mechanism
None X
In-depth inspection
Worn or broken
parts
X X
Replace worn or
broken parts
X
Lubrication See below
Pneumatic tool
oil
X
• Lubrication: If the Air-powered 3-in-1 Nailer and
the compressor are not equipped with an in-line
lubrication system, place up to 6 drops of
pneumatic tool oil into the air inlet before each
work day or after every 2 hours of continuous use,
depending on the characteristics of the workpiece
and type of fasteners used.
MC-588489-15

MasterCraft 058-8489-4 Specifications

General

Brand	MasterCraft
Model	058-8489-4
Category	Nail Gun
Language	English