13
WARRANTY
WARRANTY
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE PUMP YOURSELF. DOING SO COULD VOID
THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
This Mastercraft product carries a three (3) year LIMITED warranty against defects in
workmanship and materials. This product is not guaranteed against wear or breakage due to
misuse and/or abuse.
Made in China
Imported by
Mastercraft Canada Toronto, Canada M4S 2B8
TROUBLESHOOTING
1. Battery out of power.
2. Thermal overload.
3. Corroded plug.
4. Motor failed.
1. Screen blocked.
2. Hose kinked, bent sharply, or coiled.
3. Airlock.
4. Hose diameter too small.
5. Hose length too long.
6. Impeller loose on shaft.
7. Impeller broken.
Pump does
not start or
run.
Pump
cannot
pump
water out.
1. Recharge the battery.
2. Unplug the pump for 30 minutes, then
plug in.
3. Clean plug prongs.
4. Call service number on page 3.
1. Clean screen.
2. Straighten hose.
3. Clean airlock release feature.
4. Use larger diameter hose.
5. Use shorter hose.
6. Reassemble impeller.
7. Call service number on page 3.
Problem Possible Cause Corrective Action
TROUBLESHOOTING
To Previous Page
Loading...
