MasterCraft 062-3406-0 - Operating Instructions

model no. 062-3406-0 | contact us 1-800-689-9928
10
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
WARNING:
1. Do not allow familiarity with products to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
2. Keep water discharge pointed away from all electrical devices to reduce the risk of
electrocution or electric shock.
3. Ensure all hose connections are secure before using the pump. Spilled water and leaks can
result in a slippery surface and create a slip-and-fall hazard.
4. Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury.
5. When assembling parts, making adjustments, cleaning or not using them, turn off the pump
to prevent accidental start, resulting in serious personal injury.
NOTE: The pump has internal protection functions built in to it. The LED (A) will flash indicating the error
function. Please refer to the LED function chart to determine the proper pump error mode.
NOTE: If the pump is connected to a battery or power supply while the ON/OFF switch (B) is in the ON
position, the pump may not start. To start the pump, set the ON/OFF switch (B) in the OFF position, then
switch to the ON position.
• To start the pump, set the ON/OFF switch (B) to the ON position.
Press the switch.
• To stop the pump, set the ON/OFF switch (B) to the OFF position.
Press the switch once; the button pops up.
A
B