MasterCraft 062-3406-0 - Page 6

model no. 062-3406-0 | contact us 1-800-689-9928
6
SAFETY
• Keep the product and its handle dry, clean and free from oil and grease. Always use a clean
cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any
strong solvents to clean your product. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
• Clean only with dry cloth.
• Do not operate near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
BATTERY: USE AND CARE
• Recharge only with the charger that is supplied with the pump. Using a different battery
charger to charge the battery pack may create a risk of fire.
• Disconnect power supply from product before making any adjustments or storing the
product. Such preventive safety measures reduce the risk of starting the product
accidentally.
• If for some reason the lithium-ion battery stops working or fails to charge, please contact the
manufacturer service department (1-800-689-9928). Do not attempt to change the battery.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
ADDITIONAL SAFETY PRECAUTIONS
1. Know the pump applications, limitations, and potential hazards.
2. Make certain the electrical power source is adequate for the requirements of the pump.
3. The pump is designed for use with clean, cold, fresh water. Do not use to pump any
flammable liquid.
4. ALWAYS disconnect the power to the pump before servicing.
5. Secure the pump on a solid base to keep the pump vertical and above mud and sand during
operation to maximize pumping efficiency and prevent clogging and premature pump failure.
6. Secure the discharge hose before starting the pump. Pump torque may cause an unsecured
discharge hose to “whip,” possibly causing personal injury and/or property damage.
7. Before using the pump, check the hose for holes or excess wear which could cause leaks,
and be sure the hose is not kinked or making sharp angles. Straight hose allows the pump to
move the greatest amount of water quickly.