EasyManuals Logo
Home>MasterCraft>Water Pump>062-3413-2

MasterCraft 062-3413-2 User Manual

MasterCraft 062-3413-2
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
SAFETY
SAFETY
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-800-689-9928.
WARNING
Running the pump without sufficient water will damage the pump and void the pump's
warranty.
Do not pump flammable or explosive liquids such as oil gasoline kerosene ethanol, etc. Do not
use in the presence of flammable or explosive vapours. Using this pump with or near
flammable liquids can cause an explosion or fire, resulting in property damage, serious
personal injury and/or death.
Always disconnect the pump from its power source before inspection.
Do not stand in water when the pump is connected. Do not handle pump with wet hands.
Do not touch the pump housing while it is operating as the pump may be HOT and can cause
serious skin burns.
Do not disassemble the motor housing. This pump has NO repairable internal parts, and
disassembling may cause dangerous electrical wiring issues.
CAUTION:
This pump is made of high-strength corrosion-resistant materials. It will provide
trouble-free service for many years when properly installed, maintained, and used.
However, inadequate electrical power or blockage by dirt could cause damage to the pump
and void the warranty. To minimize the potential for water damage due to pump failure
please read the section of this manual regarding common pump problems and remedies or
call one of our pump experts at 1-800-689-9928.
This pump is not designed to function as a permanently installed pump. It is also not
engineered to be run continuously as a "fountain" or "waterfall" pump. The pump should
be used with a 5/8" (1.6 cm) or larger inside diameter garden hose.
For safety, the pump motor has an automatically resetting thermal protector that
automatically will turn off the pump if it becomes too hot. Overuse of this feature will
damage the pump and void the warranty.
Once the thermal protector detects that the pump has cooled to a safe temperature, it will
allow the pump to operate normally. If the pump is plugged in, it may restart unexpectedly.
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 062-3413-2 and is the answer not in the manual?

MasterCraft 062-3413-2 Specifications

General IconGeneral
BrandMasterCraft
Model062-3413-2
CategoryWater Pump
LanguageEnglish

Related product manuals