13
WARNING
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the pump from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
MAINTENANCE
MAINTENANCE
1. Clean the inlet screen on the intake port regularly to remove accumulated debris.
2. Wipe the pump clean with a soft, damp cloth dampened with soapy water. Do not use
solvents. Do not get the electrical components wet.
3. Drain water from pump before storage by disconnecting the water lines and turning
the pump upside down. If storing the pump for a long time, store it in a dry location,
and apply a light layer of oil to the metal parts prior to storage to inhibit rust. Do not
expose to freezing temperatures.
4. After storage, check the impeller to make sure it turns easily and is not oxidized.
To Next Page
Loading...
Need help?
General
